Linear drainage channels new

Patented product

DESCRIPTION AND USES

The HA reinforced concrete linear drainage channels by PREFABRICADOS ALBERDI S.A. are intended, principally, for creating grooved channels that serve as drainage for rainwater and collect any spillage inside tunnels to redirect it to the corresponding liquid extraction system.

They are pipes that guarantee tightness (tongue and grooved joint using the same type of separate gasket used for wastewater pipes), resistance (area subject to high loads of vehicles, for example, ports and docks) and durability (thanks to the high density of concrete and the use of additives against the chemical corrosion caused by the de-icing salts) of the pipe.
At the same time, the drainage channels guarantee environmental protection, as the run-off water polluted with oil from the vehicle transit surfaces (motorways, roads, petrol stations, parking areas, etc.…) does not reach the subsoil, and can be treated properly in oil settling tanks before outfall into rivers.

The method used for their manufacture is the same as for wastewater pipes, radial compression, producing “bell and spigot” pipes (hereafter TEC). In addition, it is simple to install on-site, and can permit a yield of up to 600m/day at any time of year.

TECHNICAL DATA

• Download technical data - Linear drainage channels

NAME AND REGULATIONS

ACCORDING TO UNE EN 1344:2003

NOMINAL DIMENSIONS

QUALITY CONTROL

The following tests shall be performed:

• Compression resistance of specimens of fresh concrete
• Analysis of the consistency of fresh concrete
• Alkalinity and water absorption
• Mechanical resistance: breakage test of the three edges
• Tightness tests on the pipes and the gasket

PHOTO GALLERY

Linear drainage channel Ø300 01

Linear drainage channel Ø300 02

Linear drainage channel Ø300 03

Linear drainage channel Ø300 04

 

Linear drainage channels

Linear drainage channels

Tubos CAZ

Tubos CAZ

 

Tubos CAZ

Tubos CAZ

Tubos CAZ

Tubos CAZ

 

Tubos CAZ